How To Solve The Locking Of Non-Standard Screws?

When dealing with the locking or seizing of non-standard screws, the approach can vary depending on the specific situation and the cause of the locking. Here are some general strategies that might help:

Lubrication: Apply a penetrating oil or lubricant to the screw. Products like WD-40, PB Blaster, or liquid wrench are designed to penetrate tight spaces and can help loosen the screw. Allow the lubricant to sit for a while to penetrate the threads before attempting to remove the screw.

Impact Method: Sometimes, gently tapping the screw with a hammer can help loosen it. The vibration and shock can break the bond caused by rust, corrosion, or over-tightening.

Heat Application: Applying heat can sometimes be effective, especially if thread-locking compounds have been used. The heat can cause the metal to expand and the compound to soften, making it easier to unscrew. Be careful with this method, as it can damage the material around the screw or the screw itself.

Use the Correct Tools: Ensure you are using the right size and type of screwdriver or wrench. Using a tool that doesn’t fit well can make the problem worse by stripping the screw head.

Manual Impact Driver: A manual impact driver is a tool that converts a hammer strike into a powerful twisting force. This can be very effective for stubborn screws, especially those that are seized or have damaged heads.

Screw Extractor: If the head of the screw is damaged or stripped, a screw extractor tool can be used. These tools are designed to grip the inside of the screw, allowing you to apply torque to remove it.

Drilling Out the Screw: As a last resort, you can drill out the screw. Start with a small drill bit and gradually increase the size until you can remove the screw remains. This method is destructive and should be used only when other methods fail.

Chemical De-bonding Agents: If a thread-locking compound was used, certain de-bonding agents or chemicals can soften or dissolve these compounds.

Always proceed with caution and patience when dealing with locked or seized screws, especially non-standard ones. If you’re not confident in your ability to remove the screw without causing damage, it might be best to seek the help of a professional.

Xinchi Fastener Company is a trustworthy fastener company, especially in furniture nuts. We have a factory, which was founded in 2007(Factory Video). And we are the designated fastener supplier to“STAPLE”. As a trusted fastener supplier,  Xinchi Fastener Company can offer a wide range of high-quality fasteners, including T nuts, screws, bolts, rivets, washers, etc. If you want to know more about fasteners or want to wholesale fasteners, please feel free to contact us. And then our experienced and expert service team will reply to you as soon as possible.