The Key Point Of The Semi-Hollow Rivet

Semi-hollow rivet is a commonly used fastener, and plays an important role, in fact, it has several key points. As a professional fastener manufacturer, Xinchi is pleased to introduce the key points of semi-hollow rivets.

Because it belongs to the appearance, the rivet is usually exposed to the outside after use, we have relatively high requirements for the finish, roundness, and plane including indentation, burr, and so on. The top of this surface should be made very smooth, there should be no burr indentation, and so on.

The cut of the tail of the semi-hollow core rivet must be flat, and can not be inclined or a little semicircular. And because it is semi-hollow, it has an inner hole, and the inner hole must be deep enough, It also requires that the inner hole must be played in the center of the middle, which means that the side must be uniform, and the thickness must be uniform. Only when the thickness is even, will it eventually be turned out when it is used, and it will not crack when it is turned out. If the thickness is not uniform, then one side is thin and one side is thick, then it must be cracked when it turns out, and the thin side will be cracked off so that it will affect the use of it, and affect its appearance. This is the key place to make half-hollow rivets.

XINCHI is a trustworthy fastener company, especially in furniture nuts. We have a factory,  founded in 2007. And we are the designated fastener supplier to“STAPLE”. As a trusted fastener supplier,  XINCHI can offer a wide range of high-quality fasteners, including nuts, screws, bolts, rivets, washers, etc. If you want to know more about fasteners or want to wholesale fasteners, please feel free to contact us. And then our experienced and expert service team will reply to you as soon as possible.