The Solution To The Rust Of The Phillips Screw

Cross-screw rust is difficult to disassemble, as a professional fastener manufacturer, Xinchi is happy to share with you to solve the problem of cross-screw rust. Here are some solutions.

Infiltration: Use rust remover or kerosene to soak the nut, and then unscrew it after washing.

Vibration: For rusty Phillips screws, do not use a wrench to twist forcibly, so as not to damage the screw head or wrench. The handle of the wrench can be gently vibrated, usually to loosen rusty Phillips screws.

Knock: Use the edge of a square-topped hammer to knock the rusted nut to loosen it. The cast iron can be knocked with greater force for the bolts and nuts at both ends of the bicycle pedal, and the plastic should be lightly knocked. If the knock still does not work, you can turn in the direction of the nut knock, often can easily remove the nut.

Barbecue + dripping oil: For seriously rusty Phillips screws, the above method is still ineffective, you can use the “fire attack” method. Grill the screws and nuts thoroughly using a gas welding oxide flame, then drizzle with a little oil. The purpose of heating the Phillips screw is to thermally expand it so that it is easier to remove.

XINCHI is a trustworthy fastener company, especially in furniture nuts. We have a factory,  founded in 2007. And we are the designated fastener supplier to“STAPLE”. As a trusted fastener supplier,  XINCHI can offer a wide range of high-quality fasteners, including nuts, screws, bolts, rivets, washers, etc. If you want to know more about fasteners or want to wholesale fasteners, please feel free to contact us. And then our experienced and expert service team will reply to you as soon as possible.