DIN 929 Hex Weld Nuts: Design, Sizes and Uses
DIN 929 hex weld nuts are used to add threaded connections to metal parts. They are often found in automotive components, sheet metal products, machinery, and metal furniture.
These nuts have a hexagonal body and welding projections on one side. They can be welded directly onto a metal surface, leaving an internal thread ready for a bolt or screw.

DIN 929 Hex Weld Nut
DIN 929 Hex Weld Nut Design
A DIN 929 hex weld nut has a hexagonal shape with an internally threaded hole and welding projections on one side. The projections are used to attach the nut to the base material through resistance welding.
Unlike a standard hex nut, it does not need to be held in place with a separate tool during final assembly once it has been welded onto the workpiece.
The hexagonal body also makes it easy to identify DIN 929 weld nuts compared with square weld nuts specified under DIN 928.

DIN 929 Hex Weld Nut
DIN 929 Hex Weld Nut Sizes and Dimensions
DIN 929 covers metric coarse-thread sizes from M3 to M16, as well as fine-thread versions from M8 to M16.
The main dimensions to check are thread size, nut height, width across flats, and the welding area diameter.
For example, an M6 DIN 929 weld nut has a height of 5 mm and a width across flats of 11 mm. For M8, these dimensions are 6.5 mm and 14 mm. An M10 nut has a height of 8 mm, while an M12 version measures 10 mm in height.
The welding dimensions also vary with the nut size. If you are ordering DIN 929 hex weld nuts, it is worth checking the full drawing to make sure the nut matches your panel and welding requirements.

DIN 929 Hex Weld Nut
DIN 929 Hex Weld Nut Materials
Carbon steel and stainless steel are common material choices for DIN 929 hex weld nuts.
Carbon steel nuts are widely used in general metal fabrication, automotive parts, and machinery. Stainless steel A2 and A4 versions are also available when better corrosion resistance is needed.
Surface finishes vary with the material and customer requirements. Carbon steel nuts may have protective coatings, while stainless steel versions are often supplied without an additional coating.
For welded applications, the base material and welding process should also be considered when choosing the nut.
Where Are DIN 929 Hex Weld Nuts Used?
DIN 929 hex weld nuts are used in products that need fixed threaded mounting points. Some typical applications include:
- Automotive parts: Mounting brackets, body panels, and metal components.
- Sheet metal products: Cabinets, electrical enclosures, and metal panels.
- Industrial machinery: Equipment frames, covers, and structural components.
- Metal furniture: Connections between metal frames and other parts.
They are a practical option when a threaded connection needs to be added directly to a metal component.
DIN 929 Hex Weld Nuts from Xinchi Fastener Factory
Xinchi Fastener Factory has been manufacturing fasteners since 2007. We have 102 cold heading machines, with a daily production capacity of more than 10 million pieces.

Xinchi Fastener Factory
Our new factory covers 30,000 square meters and consists of two six-story buildings. Besides DIN 929 hex weld nuts, we also supply DIN 928 square weld nuts, DIN 1624 T nuts, Hopper Feed T nuts, rivet nuts, threaded insert nuts, bolts, and washers.
Contact Xinchi Fastener Factory for product details and custom fastener requirements.
Recent Comments