How Cage Nuts Are Used in Data Center Server Racks
In data centers, servers, network switches, and other equipment are often installed in 19-inch server racks. For racks with square-hole mounting rails, cage nuts are commonly used to secure this equipment.
A cage nut consists of a threaded nut held inside a spring steel cage. The cage clips into a square hole in the rack rail, providing a threaded point for a mounting screw.

cage nut
Cage Nut Applications in Data Center Server Racks
In a typical data center, several types of equipment need to be mounted inside server racks. Cage nuts are used at the mounting points to secure these components to the rack rails.
Common applications include:
- Server mounting: Cage nuts and matching screws secure rack-mounted servers to the vertical mounting rails.
- Network switches: They provide threaded mounting points for switches and other network equipment.
- Patch panels: Cage nuts are used to attach patch panels to rack rails.
- Rack accessories: Other equipment, such as cable management panels and rack-mounted power distribution units (PDUs), may also use cage nuts, depending on their mounting design.
The main requirement is that the rack has compatible square mounting holes and that the cage nuts match the equipment’s mounting screws.

cage nut
How to Install Cage Nuts in a Server Rack
When installing a server or network device, cage nuts are fitted into the square holes on the rack’s vertical mounting rails before the equipment is secured.
The installation process is straightforward:
- Identify the mounting positions according to the equipment’s installation instructions.
- Position the cage nut at the selected square hole.
- Compress the spring clips and insert the cage nut into the hole.
- Release the clips so they hold the cage nut in position.
- Align the equipment with the mounting holes and tighten the matching rack screws.
A cage nut can also be removed and replaced when equipment is relocated or the mounting hardware needs to be changed. A cage nut installation tool can make this process easier, especially when working with multiple mounting points.

cage nut
Choosing the Right Cage Nuts for Server Racks
Cage nuts are available in different thread sizes, and the correct choice depends on the rack and equipment specifications.
M6, 10-32, and 12-24 are commonly available options for rack mounting. The screw thread must match the cage nut, and the cage dimensions must also suit the square holes and rail thickness.
For data center installations, checking these details before ordering helps avoid problems during equipment installation.

cage nut
Cage Nut Production at Xinchi Fastener Factory
Xinchi Fastener Factory was established in 2007. We operate 102 cold heading machines, with a daily production capacity of more than 10 million pieces.
Our new factory covers 30,000 square meters and consists of two six-story buildings.

Xinchi Fastener Factory
In addition to cage nuts, we manufacture DIN 1624 T nuts, Hopper Feed T Nuts, thread insert nuts, rivet nuts, square weld nuts, hex weld nuts, wing nuts, DIN 571 wood screws, bolts, washers, and other fasteners for different industrial applications.
Recent Comments